I have my Evo-All hooked up to a 2011 Taurus with PTS. If I do the 3x lock start then it will go through the lock unlock lock routine (I set that) and it will attempt to turn the ignition on. It will come up and say no key detected, but if I have the key in range (like I am sitting in the car with the key) and do the 3x lock it will turn the ignition on to accessory mode, but not run mode and it will not start the car. It does activate the brake light and the relays can be heard clicking. The guide told me to hook up to a wire that was not in the connector specified but if I use an earlier guide (given to me by the troubleshooting page) it shows a different wire in another connector that my car does have. Here is a link to my previous thread that describes it more: https://fortin.ca/en/qa/56883/2011-taurus-push-to-start-what-do-i-need?show=56883#q56883
EDIT: I didn't change anything, but now when I plug in the white 20 pin connector it will turn the car on provided that I have the key handy... Also, unlike before, now it does not turn the ignition to any mode. If I do the 3x lock and when it turns the brake lights on if I hit my start button it will start the car without me hitting the brake. I don't know what else to do
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
